www.thestoneshack.co.uk
Welcome to

The Stone Shack

Cast Stone Balustrade

Total Height of completed balustrade

(without finials) is 23" / 585mm

 

Baluster

120mm Square x 470mm High

(4.75" x 18.5")

 

 

Universal Rail

790mm Long x 155mm Wide x 55mm High

(31" x 6.25" x 2.25")

  

 

Complete Pier

(1 x middle section 1 x top cap 1 x bottom cap)

305mm Square x 585mm High

(12" x 23")

 

 

-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------We cast all our products from high grade sustainable minerals and selected limestone based aggregates. All raw materials meet the recognised industry standards. All our cast stone products comply with relevant British standards (B.S 1217 :1997). and are aimed at meeting all standards set by the United Kingdom Cast Stone Association. (UKCSA) manufacturing standard. All our products contain calcium chloride granules ensuring total frost resistance down to -19

We send a randomly selected piece of cast stone once monthly for non destructive testing, whereupon the stone is subject to several basic procedures, including X-ray inspection for internal fractures, and stress testing.

We have consistently passed all specifications laid down and widely accepted by the pre cast industry as standard on every single test we have conducted, namely compressive strength 35 N/mm (35Mpa) Capillary absorption test.

As UKCSA Spec.Flatness of plane Max 0.3 % dimension or +/-2mm

Thank You for visiting .......

 

For quickest response please EMAIL

 

 

stoneshacksales@aol.com

                              07502 136479

 

 

The Stone Shack.  Unit 1.  Bridge Farm Workshops. Southampton Road. Landford. Wiltshire. SP5 2ED

ssball1.pngssbal10.pngssball11.pngssball8.png

Our cast stone balustrade is an affordable quality addition to any property, either as a feature within the garden, the framing of a patio, or as a highly attractive and decorative wall around a driveway/pool/BBQ area etc.

 

We produce 1 style of balustrade only, extra height can be acheived by placing the balustrade upon a brick/block wall, as illustrated.

 

It can be used as shown within brick work as a feature, or with the piers to create a highly pleasing wall/boundry.

As all our balustrade is produced to order we can supply our stock colours of 'portland' or 'buff' , however we are able to colour match your new balustrade closely with any existing stoneware/paving etc already in place, we do not charge for this service.

 

Almost anyone can erect our design of balustrade themselves without any prior building knowledge ONLY on the proviso you have a perfectly level base for the entire length of your proposed run.  We will be happy to discuss this in detail at time of ordering.

 

 

Below we have the details of our balustrade along with costings etc, however for an accurate immediate quotation, please call us on 07502 136479 whereupon we will calculate your given metric/imperial requirements, which will allow you to decide if you then wish for a formal written quotation to be forwarded.

ssball3.pngssball5.pngssball6.png

 

Ball Finial

235mm Square base x 355mm High

(9.5" x 14")

 

 

--------------------------------------------

£15.48 per Ft*

£50.78 per Mt*

or

£40.00 per section

(3 balusters 2 rails)

*Prices based on configuration of 3 balusters per rail as illustrated

 

 

 

Complete Piers

£35.00

 

 

9" Ball Finial Plinth (illustrated)

£23.00

 

 

9" Ball Finial Sphere (no plinth)

£18.00

------------------------------------------

ssball7.pngssball7.pngssball4.pngafter.JPG